Mr.Clean Autodry Carwash Set dial to RINSE and wet car. Set dial to SOAP and spray car. Soap car with mitt or sponge.
ProductsAssemblyDemoOwners Manual The Clean Process

Mr. Clean AutoDry™ Carwash is easy to assemble and use. Here's a quick rundown of the steps:
Step 1: Remove filter's red tape seal. Step 1
Remove filter's red tape seal.
Step 2: Remove door and firmly insert filter. Replace door. Step 2
Remove door and firmly insert filter. Replace door.
Step 3: Fill soap tank up to the arrow on the soap reservoir. Step 3
Fill soap tank up to the arrow on the soap reservoir.
Step 4: Attach garden hose. Then grab your mitt or sponge and go! Step 4
Attach garden hose. Then grab your mitt or sponge and go!

Turn Page
The Clean ProcessMr.Clean Autodry Carwash
 

Once you have the Mr. Clean AutoDry Carwash assembled and ready to go, follow this simple spot-free process for cleaning our car:

The Mr. Clean® Wash
1. Set dial to RINSE and wet car.

2. Set dial to SOAP and spray car. Soap car with mitt or sponge.

3. Rinse again to eliminate all suds. (Make sure to marvel as Mr. Clean AutoDry Soap with Dry Rinse Polymer™ sheets water off your car for fast drying.)

The Mr. Clean AutoDry
4. Now, set dial to MR. CLEAN AUTODRY (delivers de-ionized water spray from filter).

5. Spray entire car, starting at the top.

6. Stay within 1 foot of car while spraying back and forth until regular rinse water has been rinsed away.

Watch your baby dry spot-free with zero hand drying—right before your eyes!

Want to learn more? Download the Mr. Clean AutoDry Owner's Manual.

Turn Page

   BBB - ACCREDITED BUSINESS© 2008 Procter & GambleLegalPrivacy Policy Contact Us